Rear Door Adjustment

WARNING: This page is about a different car, the 2007 Hummer H2. However, it is still accessible from the selected car via links, so may be relevant.

Loosen the door hinge bolts and adjust the door by moving the door:
- Upward or downward
- Forward or rearward
- Inward or outward

Fig 1: Adjusting Front Door To Rear Door Gap

Courtesy of GENERAL MOTORS CORP.

Adjust the rear door to front door gap to 5 mm (0.2 in).

Fig 2: Adjusting Rear Door To Body Side Panel

Courtesy of GENERAL MOTORS CORP.

Adjust the rear door to body side panel 5 mm (0.2 in).

Fig 3: Adjusting Rear Door To Rocker Panel Gap

Courtesy of GENERAL MOTORS CORP.

Adjust the rear door to rocker panel gap to 5 mm (0.2 in).

NOTE: Refer to Fastener Notice .

When proper adjustment specifications are set,
Tighten: Tighten the hinge bolts to 25 N.m (18 lb ft).