LEMON Manuals: Even more car manuals for everyone
Home >> Hummer >> 2008 >> H2 4D Utility Wagon >> Repair and Diagnosis >> External Pages >> Different car >> Section 10 (Bolted Exterior Body Panels And Closures) >> Repair Instructions >> Rear Compartment Liner Replacement >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2007 Hummer H2. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: Floor Liner Cargo Tie Down Loops
    GM1412532Courtesy of GENERAL MOTORS CORP.
  1. Open the midgate.
  2. Release the midgate weatherstrip seal from the front edge of the floor liner.
  3. Open the spare tire carrier.
  4. Open the endgate.
  5. Remove the 4 bolts (1) securing the cargo tie down loops (2) and floor liner to the body.
  6. Remove the bolts and tie down loops.
  7. Remove the floor liner from the vehicle.