LEMON Manuals: Even more car manuals for everyone
Home >> Hummer >> 2008 >> H2 4D Utility Wagon >> Repair and Diagnosis >> External Pages >> Different car >> Section 10 (Bolted Exterior Body Panels And Closures) >> Repair Instructions >> Midgate Hinge Reinforcement Replacement >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2007 Hummer H2. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the midgate inner panel. Refer to Midgate Inner Panel Replacement .
  2. Remove the midgate window. Refer to Midgate Window Replacement .
  3. Remove the midgate window regulator assembly. Refer to Midgate Window Regulator Replacement .
    4. Fig 1: Identifying Midgate Hinges & Midgate Hinge Reinforcements
    GM1033740Courtesy of GENERAL MOTORS CORP.
  4. Mark the position of the midgate hinges (2) using a grease pencil.
  5. Mark the position of the midgate hinge reinforcement (1) using a grease pencil.
  6. Remove the nuts retaining the midgate hinge reinforcement to the midgate.
  7. Remove the hinge reinforcement plate (1) from the midgate.
scientia non olet · About LEMON Manuals