LEMON Manuals: Even more car manuals for everyone
Home >> Hummer >> 2008 >> H2 4D Utility Wagon >> Repair and Diagnosis >> External Pages >> Different car >> Section 10 (Bolted Exterior Body Panels And Closures) >> Repair Instructions >> Liftgate Wedge Replacement - Body Side >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2007 Hummer H2. However, it is still accessible from the selected car via links, so may be relevant.
  1. Open the liftgate.
    2. Fig 1: Liftgate Body Side Wedge
    GM832841Courtesy of GENERAL MOTORS CORP.
  2. Remove the fastener (1) retaining the wedge to the vehicle.
  3. Remove the wedge (2) from the vehicle. Note the wedge location and placement of the wedge seal.
scientia non olet · About LEMON Manuals