LEMON Manuals: Even more car manuals for everyone
Home >> Hummer >> 2008 >> H2 4D Utility Wagon >> Repair and Diagnosis >> External Pages >> Different car >> Section 10 (Bolted Exterior Body Panels And Closures) >> Repair Instructions >> Liftgate Replacement >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2007 Hummer H2. However, it is still accessible from the selected car via links, so may be relevant.
  1. Open the liftgate.
  2. Remove the liftgate trim panel. Refer to Liftgate Trim Panel Replacement .
  3. Remove the wiring harness. Refer to Liftgate Wiring Harness Replacement .
  4. Disconnect the wiper washer hose.
  5. Remove the liftgate struts. Refer to Liftgate Strut Replacement .
    6. Fig 1: Identifying Liftgate Hinge Bolts
    GM832253Courtesy of GENERAL MOTORS CORP.
  6. With an assistant securing the liftgate, remove the bolts (1) retaining the liftgate to the liftgate hinge.
  7. With the aid of an assistant, remove the liftgate from the vehicle.
scientia non olet · About LEMON Manuals