LEMON Manuals: Even more car manuals for everyone
Home >> Hummer >> 2008 >> H2 4D Utility Wagon >> Repair and Diagnosis >> External Pages >> Different car >> Section 10 (Bolted Exterior Body Panels And Closures) >> Repair Instructions >> Liftgate Latch Replacement >> Removal Procedures

Removal Procedures

WARNING: This page is about a different car, the 2007 Hummer H2. However, it is still accessible from the selected car via links, so may be relevant.
  1. Open the liftgate.
    2. Fig 1: Electrical Connectors & Liftgate Latch
    GM831323Courtesy of GENERAL MOTORS CORP.
  2. Remove the fasteners (1) retaining the latch to the liftgate.
  3. Disconnect the electrical connector (2) from the latch.
  4. Disconnect the latch release cable (3) by releasing the retainer and removing the cable end from the cup.
  5. Remove the latch from the liftgate.
scientia non olet · About LEMON Manuals