LEMON Manuals: Even more car manuals for everyone
Home >> Hummer >> 2008 >> H2 4D Utility Wagon >> Repair and Diagnosis >> External Pages >> Different car >> Section 10 (Bolted Exterior Body Panels And Closures) >> Repair Instructions >> Hood Insulator Replacement >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2007 Hummer H2. However, it is still accessible from the selected car via links, so may be relevant.
  1. Open the hood.
    2. Fig 1: Hood Insulator Push-In Retainers
    GM820960Courtesy of GENERAL MOTORS CORP.
  2. Using a flat-bladed trim tool, remove all of the hood insulator push-in retainers (2).
scientia non olet · About LEMON Manuals