LEMON Manuals: Even more car manuals for everyone
Home >> Hummer >> 2008 >> H2 4D Utility Wagon >> Repair and Diagnosis >> External Pages >> Different car >> Section 10 (Bolted Exterior Body Panels And Closures) >> Repair Instructions >> Hood Hold-Open Rod Replacement >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2007 Hummer H2. However, it is still accessible from the selected car via links, so may be relevant.
    CAUTION: Refer to Hood Hold-Open Device Caution .
  1. Open the hood.
    2. Fig 1: Hood Hold-Open Rod
    GM861117Courtesy of GENERAL MOTORS CORP.
  2. Remove the hood hold-open rod from the plastic retainer (3).
  3. Remove the fastener (2) retaining the rod (1) to the vehicle.
  4. Remove the rod from the vehicle.
scientia non olet · About LEMON Manuals