LEMON Manuals: Even more car manuals for everyone
Home >> Hummer >> 2008 >> H2 4D Utility Wagon >> Repair and Diagnosis >> External Pages >> Different car >> Section 10 (Bolted Exterior Body Panels And Closures) >> Repair Instructions >> Hood Hinge Replacement >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2007 Hummer H2. However, it is still accessible from the selected car via links, so may be relevant.
    CAUTION: Refer to Hood Hold-Open Device Caution .
    Fig 1: Locating Hood Hinge Bolts
    GM820616Courtesy of GENERAL MOTORS CORP.
  1. With the hood properly supported, remove the nuts (1) retaining the hood to the hinge.
  2. With the hood still supported, remove the bolts (2) retaining the hinge to the front bumper support.
  3. Remove the hinge.
  4. With the aid of an assistant, carefully close the hood.
scientia non olet · About LEMON Manuals