LEMON Manuals: Even more car manuals for everyone
Home >> Hummer >> 2008 >> H2 4D Utility Wagon >> Repair and Diagnosis >> External Pages >> Different car >> Section 10 (Bolted Exterior Body Panels And Closures) >> Repair Instructions >> Hood Handle Replacement >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2007 Hummer H2. However, it is still accessible from the selected car via links, so may be relevant.
  1. Open the hood.
  2. Remove the hood insulator. Refer to Hood Insulator Replacement .
    3. Fig 1: Hood Handle & Fasteners
    GM856695Courtesy of GENERAL MOTORS CORP.
  3. Remove the fasteners (1) retaining the hood handle to the hood.
  4. Remove the hood handle (2) from the hood.
scientia non olet · About LEMON Manuals