LEMON Manuals: Even more car manuals for everyone
Home >> Hummer >> 2008 >> H2 4D Utility Wagon >> Repair and Diagnosis >> External Pages >> Different car >> Section 10 (Bolted Exterior Body Panels And Closures) >> Repair Instructions >> Front Side Door Adjustment

Front Side Door Adjustment

WARNING: This page is about a different car, the 2007 Hummer H2. However, it is still accessible from the selected car via links, so may be relevant.
  1. Loosen the door hinge bolts and adjust by moving the door:
    • Upward and downward
    • Forward and rearward
    • Inward or outward
  2. Fig 1: Adjusting Front Door To Fender Gap
    GM839745Courtesy of GENERAL MOTORS CORP.
  3. Adjust the front door to fender gap to 5 mm (0.2 in).
  4. Fig 2: Adjusting Front Door To Rear Door Gap
    GM839813Courtesy of GENERAL MOTORS CORP.
  5. Adjust the front door to rear door gap to 5 mm (0.2 in).
  6. Fig 3: Adjusting Front Door To Rocker Panel Gap
    GM839824Courtesy of GENERAL MOTORS CORP.
  7. Adjust the front door to rocker panel gap to 5 mm (0.2 in).
  8. Fig 4: Adjusting Front Door To Roof Gap
    GM839829Courtesy of GENERAL MOTORS CORP.
  9. Adjust the front door to roof gap to 8.6 mm (0.33 in).
  10. NOTE: Refer to Fastener Notice .
  11. When proper adjustment specifications are set:

    Tighten:  Tighten the hinge bolts to 25 N.m (18 lb ft).