LEMON Manuals: Even more car manuals for everyone
Home >> Hummer >> 2008 >> H2 4D Utility Wagon >> Repair and Diagnosis >> External Pages >> Different car >> Section 10 (Bolted Exterior Body Panels And Closures) >> Repair Instructions >> Endgate Lower Hinge Replacement - Body Side >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2007 Hummer H2. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the endgate from the vehicle. Refer to Endgate Replacement .
  2. Mark the position of the endgate hinge using a grease pencil.
    3. Fig 1: View Of Hinge Trunnion Bolts
    GM1412521Courtesy of GENERAL MOTORS CORP.
  3. Remove the bolts retaining the hinge trunnion to the vehicle.
  4. Remove the hinge trunnion from the vehicle.
scientia non olet · About LEMON Manuals