Conditions for Running the DTC

P1516 and P2101

• The ignition is ON.
• The ignition voltage is more than 8 volts.
• The system is not in the Battery Save mode.
• The engine is running.
• DTC P0068 is not set.
• DTC P1516 and P2101 run continuously when the above conditions are met.

P2119

• The ignition is ON.
• The vehicle speed is 0 km/h (0 mph).
• The ignition 1 voltage is more than 10 volts.
• DTC P2119 runs once per ignition cycle when the above conditions are met for more than 1 second.

P2176

• The ignition is ON.
• DTCs P0120, P0122, P0123, P0220, P0222, P0223 are not set.
• DTC P2176 runs once per key cycle.