LEMON Manuals: Even more car manuals for everyone
Home >> Hummer >> 2008 >> H2 4D Utility Wagon >> Repair and Diagnosis >> Engine Mechanical >> Engine Exhaust >> Repair Instructions >> Exhaust Heat Shield Replacement - Dash Panel >> Removal Procedure

Removal Procedure

  1. Raise and suitably support the vehicle. Refer to Lifting and Jacking the Vehicle .
  2. Remove the engine protection shield bolts and shield. Refer to Engine Protection Shield Replacement .
    3. Fig 1: View Of Left Exhaust Heat Shield & Nuts
    GM707396Courtesy of GENERAL MOTORS CORP.
  3. Remove the exhaust heat shield nuts.
  4. Remove the exhaust heat shield from the dash panel studs (1, 3).
scientia non olet · About LEMON Manuals