LEMON Manuals: Even more car manuals for everyone
Home >> Hummer >> 2008 >> H2 4D Utility Wagon >> Repair and Diagnosis >> Engine Mechanical >> Cooling System (Mechanical) >> Engine Cooling >> Repair Instructions >> Radiator Vent Inlet Hose Replacement >> Removal Procedure

Removal Procedure

    Fig 1: Radiator Vent Inlet Hose
    GM801115Courtesy of GENERAL MOTORS CORP.
  1. Drain the cooling system. Refer to Cooling System Draining and Filling (Static Fill)  or Cooling System Draining and Filling (Vac-N-Fill) .
  2. Remove the air cleaner resonator outlet duct. Refer to Air Cleaner Resonator Outlet Duct Replacement .
  3. Reposition the radiator vent inlet hose clamp from the radiator.
  4. Remove the radiator vent inlet hose (2) from the radiator.
  5. Remove the radiator vent inlet hose (2) from the fan shroud retainer.
  6. Reposition the radiator vent inlet hose clamp from the throttle body.
  7. Remove the radiator vent inlet hose (2) from the throttle body.
  8. Remove the vent inlet hose from the vehicle.
scientia non olet · About LEMON Manuals