LEMON Manuals: Even more car manuals for everyone
Home >> Hummer >> 2008 >> H2 4D Utility Wagon >> Repair and Diagnosis >> Engine Mechanical >> Cooling System (Mechanical) >> Engine Cooling >> Repair Instructions >> Radiator Vent Inlet Hose Replacement >> Installation Procedure

Installation Procedure

    Fig 1: Radiator Vent Inlet Hose
    GM801115Courtesy of GENERAL MOTORS CORP.
  1. Install the radiator vent inlet hose (2) to the throttle body.
  2. Install the radiator vent inlet hose clamp to the throttle body.
  3. Install the radiator vent inlet hose (2) to the fan shroud retainer.
  4. Install the radiator vent inlet hose (2) to the radiator.
  5. Install the radiator vent inlet hose clamp to the radiator.
  6. Install the air cleaner resonator outlet duct. Refer to Air Cleaner Resonator Outlet Duct Replacement .
  7. Fill the cooling system. Refer to Cooling System Draining and Filling (Static Fill)  or Cooling System Draining and Filling (Vac-N-Fill) .
scientia non olet · About LEMON Manuals