LEMON Manuals: Even more car manuals for everyone
Home >> Hummer >> 2008 >> H2 4D Utility Wagon >> Repair and Diagnosis >> Engine Mechanical >> Cooling System (Mechanical) >> Engine Cooling >> Repair Instructions >> Radiator Replacement (Electric)

Radiator Replacement (Electric)

Fig 1: View Of Radiator Assembly & Bolts
GM1698713Courtesy of GENERAL MOTORS CORP.
Callout Component Name

Preliminary Procedure

  1. Drain the cooling system. Refer to Cooling System Draining and Filling (Static Fill)  or Cooling System Draining and Filling (Vac-N-Fill) .
  2. Remove surge tank hose/pipe. Refer to Radiator Surge Tank Inlet Hose/Pipe Replacement .
  3. Remove radiator hose inlet. Refer to Radiator Inlet Hose Replacement .
  4. Remove radiator hose outlet. Refer to Radiator Outlet Hose Replacement .
  5. Remove cooling fan and shroud. Refer to Cooling Fan and Shroud Replacement .
  6. Remove engine oil cooler pipe/hose quick connect. Refer to Transmission Fluid Cooler Hose/Pipe Quick-Connect Fitting Disconnection and Connection .
  7. Remove transmission oil cooler lines. Refer to Transmission Fluid Cooler Hose/Pipe Replacement .
1 Radiator Bolt (Qty: 2)
NOTE: Refer to Fastener Notice .

Tighten:  25 N.m (18 lb ft)
2 Radiator Assembly
scientia non olet · About LEMON Manuals