LEMON Manuals: Even more car manuals for everyone
Home >> Hummer >> 2008 >> H2 4D Utility Wagon >> Repair and Diagnosis >> Engine Mechanical >> Cooling System (Mechanical) >> Engine Cooling >> Repair Instructions >> Radiator Outlet Hose Replacement >> Installation Procedure

Installation Procedure

    Fig 1: Radiator Hose & Radiator (Outlet)
    GM801112Courtesy of GENERAL MOTORS CORP.
  1. Install the radiator outlet hose (3) to the radiator (1).
  2. Position the radiator outlet hose clamp (2) to the radiator (1).
    3. Fig 2: Radiator Hose & Engine (Outlet)
    GM814575Courtesy of GENERAL MOTORS CORP.
  3. Install the radiator outlet hose (3) to the engine (1).
  4. Position the radiator outlet hose clamp (2) to the engine (1).
  5. Install the air cleaner resonator outlet duct. Refer to Air Cleaner Resonator Outlet Duct Replacement .
  6. Fill the cooling system. Refer to Cooling System Draining and Filling (Static Fill)  or Cooling System Draining and Filling (Vac-N-Fill) .
scientia non olet · About LEMON Manuals