LEMON Manuals: Even more car manuals for everyone
Home >> Hummer >> 2008 >> H2 4D Utility Wagon >> Repair and Diagnosis >> Engine Mechanical >> Cooling System (Mechanical) >> Engine Cooling >> Repair Instructions >> Radiator Inlet Hose Replacement >> Installation Procedure

Installation Procedure

    Fig 1: Radiator Hose & Radiator (Inlet)
    GM801113Courtesy of GENERAL MOTORS CORP.
  1. Install the radiator inlet hose (4) to the radiator (6).
  2. Position the radiator inlet hose clamp (5) to the radiator (6).
  3. Install the radiator inlet hose (4) to the mounting clip (3).
  4. Install the radiator inlet hose (2) to the engine (1).
    Fig 2: Radiator Hose & Engine (Inlet)
    GM814579Courtesy of GENERAL MOTORS CORP.

    Position the radiator inlet hose clamp (3) to the engine (1).

  5. Install the air cleaner resonator outlet duct. Refer to Air Cleaner Resonator Outlet Duct Replacement .
  6. Fill the cooling system. Refer to Cooling System Draining and Filling (Static Fill)  or Cooling System Draining and Filling (Vac-N-Fill) .
scientia non olet · About LEMON Manuals