LEMON Manuals: Even more car manuals for everyone
Home >> Hummer >> 2008 >> H2 4D Utility Wagon >> Repair and Diagnosis >> Engine Mechanical >> Cooling System (Mechanical) >> Engine Cooling >> Repair Instructions >> Coolant Heater Cord Replacement >> Removal Procedure

Removal Procedure

    Fig 1: Identifying Coolant Heater Cord & Electrical Connector
    GM661139Courtesy of GENERAL MOTORS CORP.
  1. Raise and suitably support the vehicle. Refer to Lifting and Jacking the Vehicle .
  2. Disconnect the coolant heater electrical connector (2).
    3. Fig 2: View Of Coolant Heater Cord, Retainer & Bolts
    GM661277Courtesy of GENERAL MOTORS CORP.
  3. Remove the coolant heater cord retainer and bolts.
  4. Remove the coolant heater cord.
scientia non olet · About LEMON Manuals