LEMON Manuals: Even more car manuals for everyone
Home >> Hummer >> 2008 >> H2 4D Utility Wagon >> Repair and Diagnosis >> Electrical >> Motors, Switches, Relays >> Wiring Systems And Power Management - Service, Troubleshooting & Diagnosis >> Delphi Connectors (Push To Seat) >> Reinstalling Terminal

Reinstalling Terminal

  1. In order to reuse a terminal or lead assembly, refer to Wiring Repairs .
  2. Ensure that the cable seal is kept on the terminal side of the splice.
  3. Insert the lead from the back until it catches.
  4. Install the TPA, CPA, and/or the secondary locks.
scientia non olet · About LEMON Manuals