LEMON Manuals: Even more car manuals for everyone
Home >> Hummer >> 2008 >> H2 4D Utility Wagon >> Repair and Diagnosis >> Electrical >> Motors, Switches, Relays >> Wiring Systems And Power Management - Introduction >> Repair Instructions >> Relay Replacement (Within an Electrical Center) >> Installation Procedure

Installation Procedure

    Fig 1: Identifying Relay And Special Tool
    GM786629Courtesy of GENERAL MOTORS CORP.
  1. Install the relay (2) in the same position as removed.
  2. Install the electrical center cover.
scientia non olet · About LEMON Manuals