LEMON Manuals: Even more car manuals for everyone
Home >> Hummer >> 2008 >> H2 4D Utility Wagon >> Repair and Diagnosis >> Drivelines & Axles >> Differentials & Drive Axles >> Front Drive Axle >> Repair Instructions >> Front Axle Lubricant Replacement >> Removal Procedure

Removal Procedure

  1. Raise the vehicle. Refer to Lifting and Jacking the Vehicle .
    2. Fig 1: Front Drive Axle Fill & Drain Plug
    GM865996Courtesy of GENERAL MOTORS CORP.
  2. Remove the front differential carrier shield, if equipped. Refer to Engine Protection Shield Replacement .
  3. Clean the area around the front axle fill plug and the drain plug.
  4. Remove the fill plug (1).
  5. Remove the drain plug (2).
  6. Drain the fluid from the front axle differential.
scientia non olet · About LEMON Manuals