LEMON Manuals: Even more car manuals for everyone
Home >> Hummer >> 2008 >> H2 4D Utility Wagon >> Repair and Diagnosis >> Drivelines & Axles >> Differentials & Drive Axles >> Front Drive Axle >> Repair Instructions >> Differential Carrier Assembly Hole Plug Replacement >> Removal Procedure

Removal Procedure

  1. Raise the vehicle. Refer Lifting and Jacking the Vehicle .
  2. Turn the front wheels to the left in order to provide access to the left side of the differential carrier assembly.
    3. Fig 1: Differential Carrier Assembly & Hole Plug
    GM847066Courtesy of GENERAL MOTORS CORP.
  3. Remove the differential carrier assembly hole plug from the differential carrier assembly.
scientia non olet · About LEMON Manuals