LEMON Manuals
: Even more car manuals for everyone
Home
>>
Hummer
>>
2008
>>
H2 4D Utility Wagon
>>
Repair and Diagnosis
>>
Brakes
>>
Traction Control
>>
Antilock Brake System With TCS & VSES
>>
Diagnostic Information and Procedures
>>
DTC C0901
>>
Conditions for Setting the DTC
Conditions for Setting the DTC
Ignition 1 (IGN1) voltage to EBCM is less than 6.5 volts for 7 seconds.
Vehicle speed is greater than 3 km/h (2 mph).