LEMON Manuals: Even more car manuals for everyone
Home >> Hummer >> 2008 >> H2 4D Utility Wagon >> Repair and Diagnosis >> Brakes >> Traction Control >> Antilock Brake System With TCS & VSES >> Diagnostic Information and Procedures >> DTC C0899 >> Circuit/System Verification

Circuit/System Verification

  1. Ignition OFF, measure the voltage at the battery terminals.
  2. Ignition ON, observe the scan tool EBCM Battery Positive Voltage parameter..
  3. Verify that battery terminal voltage and Battery Positive Voltage parameter readings do not differ by more than 2 volts.
scientia non olet · About LEMON Manuals