LEMON Manuals: Even more car manuals for everyone
Home >> Hummer >> 2008 >> H2 4D Utility Wagon >> Repair and Diagnosis >> Brakes >> Traction Control >> Antilock Brake System With TCS & VSES >> Diagnostic Information and Procedures >> DTC C0245 >> Circuit/System Description

Circuit/System Description

The wheel speed sensor receives a 12-volt reference voltage from the electronic brake control module (EBCM). As the wheel spins, the wheel speed sensor sends the EBCM a DC square wave signal via the wheel speed sensor output circuit. The EBCM uses the frequency of the square wave signal to calculate the wheel speed.

scientia non olet · About LEMON Manuals