Conditions for Running the DTC

C0035-C0050

• The ignition is ON.
• Ignition voltage is greater than 9.5 volts.

C0035-C0050 0F

• The ignition is ON.
• Ignition voltage is greater than 9.5 volts.
• The brake pedal is not pressed.
• A DTC is not set for the other wheel speed circuit on the same axle.

C0035-C0050 18

• The ignition is ON.
• Ignition voltage is greater than 9.5 volts.
• The brake pedal is not pressed.
• No other wheel speed circuit DTCs are set.
• At least 2 other wheel speeds are not 0 km/h.