LEMON Manuals: Even more car manuals for everyone
Home >> Hummer >> 2008 >> H2 4D Utility Wagon >> Repair and Diagnosis >> Brakes >> Parking Brake System >> Park Brake >> Repair Instructions >> Parking Brake Indicator Switch Replacement >> Removal Procedure

Removal Procedure

    CAUTION: Refer to BATTERY DISCONNECT CAUTION .
  1. Disconnect the negative battery cable. Refer to Battery Negative Cable Disconnection and Connection .
  2. Remove the MID-Bussed Electrical Center from the bracket.
    3. Fig 1: Park Brake Warning Lamp Switch Electrical Connector
    GM606395Courtesy of GENERAL MOTORS CORP.
  3. Disconnect the park brake warning lamp switch connector.
    4. Fig 2: Park Brake Warning Lamp Switch Mounting Bolt
    GM913316Courtesy of GENERAL MOTORS CORP.
  4. Remove the park brake warning lamp switch mounting bolt.
  5. Remove the park brake warning lamp switch.
scientia non olet · About LEMON Manuals