LEMON Manuals: Even more car manuals for everyone
Home >> Hummer >> 2008 >> H2 4D Utility Wagon >> Repair and Diagnosis >> Brakes >> Mechanical - Hydraulic >> Hydraulic Brakes >> Repair Instructions >> Master Cylinder Replacement >> Removal Procedure

Removal Procedure

    Fig 1: Power Brake Booster
    GM1977787Courtesy of GENERAL MOTORS CORP.
  1. Remove the power brake booster (1). Refer to Power Brake Booster Replacement .
    2. Fig 2: Master Cylinder Reservoir
    GM1977792Courtesy of GENERAL MOTORS CORP.
  2. Remove the master cylinder reservoir (1). Refer to Master Cylinder Reservoir Replacement .
    3. Fig 3: BPMV Gasket
    GM1977794Courtesy of GENERAL MOTORS CORP.
  3. Remove the brake pressure modulator valve (BPMV) gasket (1) and the BPMV module (2) from the master cylinder. Refer to Brake Pressure Modulator Valve Replacement .
scientia non olet · About LEMON Manuals