LEMON Manuals: Even more car manuals for everyone
Home >> Hummer >> 2008 >> H2 4D Utility Wagon >> Repair and Diagnosis >> Body & Frame >> Seats >> Seat Hardware, Trim, And Upholstery >> Repair Instructions >> Rear Seat Cushion Frame Replacement >> Removal Procedure

Removal Procedure

    Fig 1: View Of Seat Cushion Frame Components
    GM276326Courtesy of GENERAL MOTORS CORP.
  1. Remove the seat cushion trim cover (8) and the pad (7). Refer to Rear Seat Cushion Cover and Pad Replacement .
  2. Remove the bolts from the hinge assembly.
  3. Remove the seat cushion frame (5).
scientia non olet · About LEMON Manuals