LEMON Manuals: Even more car manuals for everyone
Home >> Hummer >> 2008 >> H2 4D Utility Wagon >> Repair and Diagnosis >> Body & Frame >> Seats >> Seat Hardware, Trim, And Upholstery >> Repair Instructions >> Rear Seat Back Latch Replacement >> Removal Procedure

Removal Procedure

    Fig 1: View Of Latch Assembly Bolts & Screws
    GM788614Courtesy of GENERAL MOTORS CORP.
  1. Remove the rear seat from the vehicle. Refer to Rear Seat Replacement .
  2. Remove the armrest, if equipped. Refer to Rear Seat Armrest Replacement .
  3. Remove the seat back cover. Refer to Rear Seat Back Cushion Cover and Pad Replacement .
  4. Remove the bolts (1,2) that retain the latch assembly to the seat frame.
  5. Remove the screw (3) that retains the latch assembly to the seat frame.
  6. Unsnap the recliner cables from the folding mechanism.
  7. Remove the seat back latch assembly from the seat frame.
    8. Fig 2: View Of Latch Assembly Spacer & Seat Belt Guide
    GM814964Courtesy of GENERAL MOTORS CORP.
  8. Remove the spacer (2) from the latch assembly, if equipped.
  9. Remove the seat belt guide (1) from the latch assembly, if equipped.
scientia non olet · About LEMON Manuals