LEMON Manuals: Even more car manuals for everyone
Home >> Hummer >> 2008 >> H2 4D Utility Wagon >> Repair and Diagnosis >> Body & Frame >> Seats >> Seat Hardware, Trim, And Upholstery >> Repair Instructions >> Head Restraint Replacement

Head Restraint Replacement

Fig 1: Head Restraint
GM1950033Courtesy of GENERAL MOTORS CORP.
Callout Component Name
1 Front Seat Head Restraint Assembly

Procedure

  1. Depress the button on the head restraint guide to raise the head restraint to the full up position.
  2. Insert a small diameter tool into the hole on the inboard side of the other head restraint guide and pull upward to remove.
scientia non olet · About LEMON Manuals