Front Seat Cushion Outer Trim Panel Replacement

Fig 1: Front Seat Cushion Outer Trim Panel

GM1950037

Courtesy of GENERAL MOTORS CORP.

Callout

Component Name

1

Front Seat Adjuster Outer Finish Cover Screw

NOTE: Refer to Fastener Notice .

Tighten: 2 N.m (18 lb in)

2

Front Seat Adjuster Outer Finish Cover

Procedure

Squeeze the tabs in the rear of the cover together to disengage the outer trim cover from the rear trim cover.
Pull outward to release the retainers from the seat assembly.
Disconnect the electrical connectors.
If replacing the finish cover, remove the switches and install on new finish cover.