Driver Seat and Passenger Seat Back Cushion Finish Panel Replacement

Fig 1: Driver Seat and Passenger Seat Back Cushion Finish

Courtesy of GENERAL MOTORS CORP.

Callout	Component Name
1	Front Seat Back Cushion Finish Panel Procedure On the right and left sides of the middle portion of the seatback panel, insert a flat bladed tool between the seatback panel and the seat back cushion to release the middle retainer tabs on each side. Push the tool against the tabs to release. Pull rearward at the bottom of the seat back panel to release the retainers on the lower portion of the seat back panel. Pull the panel down and rearward to release the upper retainer from the seat back frame.

Callout

Component Name

Front Seat Back Cushion Finish Panel

Procedure

On the right and left sides of the middle portion of the seatback panel, insert a flat bladed tool between the seatback panel and the seat back cushion to release the middle retainer tabs on each side.
Push the tool against the tabs to release.
Pull rearward at the bottom of the seat back panel to release the retainers on the lower portion of the seat back panel.
Pull the panel down and rearward to release the upper retainer from the seat back frame.