LEMON Manuals: Even more car manuals for everyone
Home >> Hummer >> 2008 >> H2 4D Utility Wagon >> Repair and Diagnosis >> Body & Frame >> Mirrors >> Diagnostic Information and Procedures >> Power Mirror Folding Inoperative >> Circuit/System Verification

Circuit/System Verification

  1. Ignition ON, observe the scan tool Mirror Fold Switch parameter while cycling the mirror fold switch between the extend and retract positions. The parameter should change between Idle, Extend, and Retract.
    • If the parameter does not cycle between the specified values, replace the DDS.
  2. Command the power folding mirrors to extend and retract using the mirror fold switch. Both mirrors should extend and retract as commanded.
scientia non olet · About LEMON Manuals