LEMON Manuals: Even more car manuals for everyone
Home >> Hummer >> 2008 >> H2 4D Utility Wagon >> Repair and Diagnosis >> Body & Frame >> Frames, Subframes & Crossmembers >> Frame And Underbody >> Repair Instructions >> Wheelhouse Panel Replacement >> Removal Procedure

Removal Procedure

  1. Remove the wheel. Refer to Tire and Wheel Removal and Installation .
    2. Fig 1: Wheelhouse Panel
    GM870778Courtesy of GENERAL MOTORS CORP.
  2. Remove push-in retainers (1).
  3. Remove the wheelhouse panel.
scientia non olet · About LEMON Manuals