LEMON Manuals: Even more car manuals for everyone
Home >> Hummer >> 2008 >> H2 4D Utility Wagon >> Repair and Diagnosis >> Body & Frame >> Frames, Subframes & Crossmembers >> Frame And Underbody >> Repair Instructions >> Tow Hook Replacement >> Installation Procedure

Installation Procedure

  1. Install the tow hook to the frame rail.
    2. NOTE: Refer to Fastener Notice .
  2. Install the bolts to the tow hook through the frame rail.

    Tighten:  Tighten the bolts to 95 N.m (70 lb ft).

  3. Install the front bumper. Refer to Front Bumper Replacement .
scientia non olet · About LEMON Manuals