LEMON Manuals: Even more car manuals for everyone
Home >> Hummer >> 2008 >> H2 4D Utility Wagon >> Repair and Diagnosis >> Body & Frame >> Frames, Subframes & Crossmembers >> Frame And Underbody >> Repair Instructions >> Rear Tow Eye Replacement (SUV) >> Installation Procedure

Installation Procedure

    Fig 1: Rear Tow Eye/D-Ring (SUV)
    GM796193Courtesy of GENERAL MOTORS CORP.
  1. Install the D-Rings to the vehicle.
  2. NOTE: Refer to Fastener Notice .
  3. Install the D-Ring mounting bolts.

    Tighten:  Tighten the bolts to 85 N.m (63 lb ft).