LEMON Manuals: Even more car manuals for everyone
Home >> Hummer >> 2008 >> H2 4D Utility Wagon >> Repair and Diagnosis >> Body & Frame >> Frames, Subframes & Crossmembers >> Frame And Underbody >> Repair Instructions >> Front Pull Winch Receiver Replacement >> Removal Procedure

Removal Procedure

  1. Remove the bumper. Refer to Front Bumper Replacement .
    2. Fig 1: Front Pull Winch Receiver
    GM797573Courtesy of GENERAL MOTORS CORP.
  2. Remove the winch receiver bolts from the frame.
  3. Remove the winch receiver from the vehicle.
scientia non olet · About LEMON Manuals