LEMON Manuals: Even more car manuals for everyone
Home >> Hummer >> 2008 >> H2 4D Utility Wagon >> Repair and Diagnosis >> Body & Frame >> Fixed And MOVEABLE Windows >> Repair Instructions >> Rear Side Door Window Regulator Motor Replacement >> Installation Procedure

Installation Procedure

  1. Place the window motor into position on the window module.
    2. Fig 1: Identifying Window Motor Bolts
    GM767037Courtesy of GENERAL MOTORS CORP.
  2. Install the 3 fasteners (1) retaining the window motor to the window module.
  3. Install the window module. Refer to Rear Side Door Window Module Replacement .
  4. Operate the window to ensure proper operation.
scientia non olet · About LEMON Manuals