LEMON Manuals: Even more car manuals for everyone
Home >> Hummer >> 2008 >> H2 4D Utility Wagon >> Repair and Diagnosis >> Body & Frame >> Exterior/Interior Trim >> Interior Trim And Paneling >> Repair Instructions >> Pressure Relief Valve Replacement (SUV) >> Removal Procedure

Removal Procedure

  1. Remove the quarter panel upper applique. Refer to Quarter Panel Upper Applique Replacement .
    2. Fig 1: Pressure Relief Valve (SUV)
    GM832546Courtesy of GENERAL MOTORS CORP.
  2. Using a flat-bladed tool, release the retainers (2) that retain the pressure relief valve (1) to the vehicle.
  3. Remove the pressure relief valve.
scientia non olet · About LEMON Manuals