LEMON Manuals: Even more car manuals for everyone
Home >> Hummer >> 2008 >> H2 4D Utility Wagon >> Repair and Diagnosis >> Body & Frame >> Exterior/Interior Trim >> Exterior Trim >> Repair Instructions >> Rear Wheel Opening Flare Replacement (SUT) >> Removal Procedure

Removal Procedure

    Fig 1: Wheelhouse Opening Flare
    GM1467107Courtesy of GENERAL MOTORS CORP.
  1. Remove the screws (1) from the wheelhouse opening flare (2).
  2. Remove the lower rocker panel retainers (3) securing the front lower edge of the rear flare to the body.
  3. Remove the wheelhouse flare (2) from the wheelhouse opening.