LEMON Manuals: Even more car manuals for everyone
Home >> Hummer >> 2008 >> H2 4D Utility Wagon >> Repair and Diagnosis >> Body & Frame >> Exterior/Interior Trim >> Exterior Trim >> Repair Instructions >> Rear License Plate Pocket Replacement (SUT) >> Removal Procedure

Removal Procedure

  1. Open the rear spare tire carrier.
    2. Fig 1: Hand Nut & Spare Tire Carrier Frame
    GM1427918Courtesy of GENERAL MOTORS CORP.
  2. Remove the hand nut (1) securing the license plate pocket to the spare tire carrier frame (2).
    3. Fig 2: Spare Tire Carrier Frame & License Plate Pocket
    GM1453826Courtesy of GENERAL MOTORS CORP.
  3. Remove the license plate pocket (3) from the spare tire carrier frame (2).
scientia non olet · About LEMON Manuals