LEMON Manuals: Even more car manuals for everyone
Home >> Hummer >> 2008 >> H2 4D Utility Wagon >> Repair and Diagnosis >> Body & Frame >> Exterior/Interior Trim >> Exterior Trim >> Repair Instructions >> Quarter Panel Upper Applique Replacement >> Removal Procedure

Removal Procedure

    Fig 1: Upper Quarter Panel Applique
    GM821294Courtesy of GENERAL MOTORS CORP.
  1. Open the liftgate.
  2. Remove the 2 side retaining screws.
  3. Grasp the applique at the top and the bottom, and exert rearward pressure to disengage the clips from the body.
  4. Remove the applique from the vehicle.
scientia non olet · About LEMON Manuals