LEMON Manuals: Even more car manuals for everyone
Home >> Hummer >> 2008 >> H2 4D Utility Wagon >> Repair and Diagnosis >> Body & Frame >> Exterior/Interior Trim >> Exterior Trim >> Repair Instructions >> Grille Guard/Brush Guard Replacement (Base) >> Removal Procedure

Removal Procedure

    Fig 1: Grille & Brush Guard
    GM824708Courtesy of GENERAL MOTORS CORP.
  1. Remove the lower grille. Refer to Lower Grille Replacement .
  2. Remove the bolt from the pencil brace at the hood support, if equipped.
  3. Remove the bolts retaining the brush guard to the vehicle.
  4. Remove the brush guard from the vehicle.
scientia non olet · About LEMON Manuals