LEMON Manuals: Even more car manuals for everyone
Home >> Hummer >> 2008 >> H2 4D Utility Wagon >> Repair and Diagnosis >> Body & Frame >> Exterior Body Panels >> Bolted Exterior Body Panels And Closures >> Repair Instructions >> Rear Door Opening Weatherstrip Replacement >> Removal Procedure

Removal Procedure

  1. Open the door.
  2. Fig 1: Rear Door Opening Weatherstrip
    GM862137Courtesy of GENERAL MOTORS CORP.
  3. Remove the weatherstrip (2) by pulling the weatherstrip off of the door opening pinch-weld flange (1).