LEMON Manuals: Even more car manuals for everyone
Home >> Hummer >> 2008 >> H2 4D Utility Wagon >> Repair and Diagnosis >> Body & Frame >> Exterior Body Panels >> Bolted Exterior Body Panels And Closures >> Repair Instructions >> Rear Compartment Liner Replacement >> Removal Procedure

Removal Procedure

    Fig 1: Floor Liner Cargo Tie Down Loops
    GM1412532Courtesy of GENERAL MOTORS CORP.
  1. Open the midgate.

  2. Release the midgate weatherstrip seal from the front edge of the floor liner.

  3. Open the spare tire carrier.
  4. Open the endgate.
  5. Remove the 4 bolts (1) securing the cargo tie down loops (2) and floor liner to the body.
  6. Remove the bolts and tie down loops.
  7. Remove the floor liner from the vehicle.
scientia non olet · About LEMON Manuals