Removal Procedure

CAUTION: Refer to Hood Hold-Open Device Caution .

Fig 1: Underhood Lighting Electrical Connectors & Wiring Harness

Courtesy of GENERAL MOTORS CORP.

Disconnect the underhood lighting electrical connectors and remove the wiring harness (1) from the hood.

Fig 2: Hood Support Cable Pins

Courtesy of GENERAL MOTORS CORP.

With the hood properly supported, remove the hood support cables by removing the hood support cable pins (1).
Remove the hood hinges. Refer to Hood Hinge Replacement .
With the aid of assistants, remove the hood from the vehicle.