LEMON Manuals: Even more car manuals for everyone
Home >> Hummer >> 2008 >> H2 4D Utility Wagon >> Repair and Diagnosis >> Body & Frame >> Exterior Body Panels >> Bolted Exterior Body Panels And Closures >> Repair Instructions >> Hood Insulator Replacement >> Removal Procedure

Removal Procedure

  1. Open the hood.
    2. Fig 1: Hood Insulator Push-In Retainers
    GM820960Courtesy of GENERAL MOTORS CORP.
  2. Using a flat-bladed trim tool, remove all of the hood insulator push-in retainers (2).
scientia non olet · About LEMON Manuals